S+85DLC03D
S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections
Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.
- Description
- Reviews (1)
Description
Product specifications
| Details | |
|---|---|
| Product code | S+85DLC03D |
| Connector | Dual LC |
| Data Rate | 10G |
| Distance | 300m |
| Format | SFP+ |
| Mode | MM |
| Wavelength | 850nm |
| Suggested price | |
1 review for S+85DLC03D
Add a review
Related Products
-
GPON ONU module
The GPON module allows any RouterBOARD device to be used for Fiber to Home installations without any special modems or software. A plug and play solution means you simply plug it into your device, and no special configuration is needed. It is supported by all our SFP products, with any RouterOS version – all configuration will be done on the ISP side.
The GPON ONU integrates GPON OMCI Stack and is fully compliant with ITU-T G.984 standards. The ONU is in a standardized MSA SFP form-factor and is designed to simply plug into a standard SFP port in your router.
The product provides a pluggable GPON ONU interface for networking equipment with an uplink SFP receptacle enabling these devices to be deployed in GPON networks for FTTx, business services, and wireless backhaul applications.
-
SFP+ 1m direct attach cable
This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks.
They provide a low cost, low power and low latency interconnect solution for 10-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications.
-
RB14e
RB14e is an adapter card for using four miniPCIe wireless cards in a PC with a PCIe slot. This gives you the ability to use our new R11e wireless interfaces in conventional PC computers.
Use this new adapter to expand your connectivity and upgrade your device to use the latest miniPCIe interface cards.
Comes with both low and regular profile brackets. Brackets include holes for mounting SMA connectors, or for using as cable exit holes.
-
R11e-2HPnD
R11e-2HPnD is our new 802.11b/g/n Dual Chain high power 1000mW miniPCI-e card, operating in full 2192-2732 MHz frequency. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapters – RB14e/RB14eU
Unit is equipped with two MMCX connectors
-
R52H
MikroTik introduces the R52H wireless 802.11a+b+g miniPCI card for multiband high speed applications, with up to 350mW output power. It works on 2.192-2.539 and 4.920-6.100GHz frequency range and supports Turbo mode for faster transfers. The card performs best when coupled with the MikroTik RouterOS.
R52H is optimized to work with MikroTik Nstreme protocol to reach extra long distances at a great speed. The Nstreme protocol is MikroTik proprietary wireless protocol created to overcome speed and distance limitations of IEEE 802.11 standards and to extend point-to-point and point-to-multi point wireless link performance. The new Nstreme-dual protocol designed to provide real full-duplex communications over wireless with a pair of wireless cards – one for transmitting data and one for receiving.
Card has two U.fl connectors for external antennas
admin –
good