Porto Wordpress Theme


The mAP (micro Access Point) is a tiny size wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources – USB, Passive PoE and power jack. It also works as a PoE injector – the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.

  • Description
  • Reviews (1)
  • Ethernet test results


Product specifications

Product code RBmAP2nD
10/100 Ethernet ports 2
802.11b Yes
802.11g Yes
802.11n Yes
802.3af support no
Antenna gain 1.2
CPU core count 1
CPU nominal frequency 650 MHz
Dimensions 68x68x19mm
License level 4
Max Power consumption 5W
Number of USB ports 1
Number of chains 2
Operating System RouterOS
PCB temperature monitor Yes
PoE in 802.3af/at
PoE out Yes
Power Jack 1
Size of RAM 64 MB
Storage size 16 MB
Storage type FLASH
Supported input voltage 11 V – 57 V
Tested ambient temperature -10C to +70C tested
USB Power Reset Yes
USB slot type microUSB type AB
Voltage Monitor Yes
Wireless chip model QCA9531
Wireless standards 802.11b/g/n
Suggested price

1 review for mAP

  1. 5 out of 5


Add a review

RBmAP2nD QCA9531 100M two port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 16.3 197.9 47.1 192.9 173.6 88.9
Bridging 25 bridge filter rules 16.3 197.9 47.1 192.9 56.7 29.0
Routing none (fast path) 16.3 197.9 47.1 192.9 160.8 82.3
Routing 25 simple queues 16.3 197.9 47.1 192.9 72.6 37.2
Routing 25 ip filter rules 16.3 197.9 33.8 138.4 34.6 17.7
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results