DynaDish 6
The Dynadish 6 uses the same effective antenna design and enclosure as our successful 5 GHz model, but this new device operates in the licensed 6GHz frequency. This means less interference than the often saturated 5 GHz frequencies for higher speed and more reach. By operating above the most popular WiFi frequencies you are now able to build your wireless links from busy towers without suffering problems with noise.
It is a simple and completely integrated product with everything you need to quickly install a reliable point to point link.
- Description
- Reviews (1)
Description
Product specifications
| Details | |
|---|---|
| Product code | RBDynaDishG-6HnD |
| 10/100/1000 Ethernet ports | 1 |
| 802.11a | Yes |
| 802.11n | Yes |
| Antenna gain | 25 no |
| CPU | AR9344 |
| CPU core count | 1 |
| CPU nominal frequency | 600 MHz |
| Dimensions | Ø 404 mm, |
| License level | 4 |
| Max Power consumption | 10W |
| Number of chains | 2 |
| Operating System | RouterOS |
| PCB temperature monitor | Yes |
| PoE in | Passive PoE |
| Size of RAM | 64 MB |
| Storage size | 16 MB |
| Storage type | FLASH |
| Supported input voltage | 12 V – 30 V |
| Tested ambient temperature | -40 to 70° C |
| USB Power Reset | Yes |
| Voltage Monitor | Yes |
| Wireless chip model | AR9344 |
| Wireless standards | 802.11a/n |
| Suggested price | |
1 review for DynaDish 6
Add a review
Related Products
-
SXT SA5
SXTG-5HPnD-SAr2 is a low cost, high speed 5GHz outdoor wireless sector access point. It has a 90 degree antenna to provide a wider coverage than our previous SXT units.
Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes. The inside of the case is covered in special shielding to improve operation in high interference areas and antenna front to back ratio.
Box contains: SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE injector, power adapter, quick setup guide
– RBSXTG-5HPnD-SAr2-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
– RBSXTG-5HPnD-SAr2 (International) supports 5150MHz-5875MHz range.
-
Groove 52 ac
Our smallest outdoor series model – a fully featured wireless RouterBOARD powered by RouterOS.
Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4GHz or 5GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless.
We have two versions available.
– RBGrooveG-52HPacn-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
– RBGrooveG-52HPacn (International) supports 2412-2484MHz and 5150MHz-5875MHz range.
-
SXT 6
SXT 6 is our first product for licensed 5.9-6.4GHz frequency. Equipped with RouterOS Level 4 license and 28 degree Dual Chain 16dBi antenna, unit can be used as Base Station or CPE, as well as two of them can be used to create Point-to-Point link.
IMPORTANT! Product is available for 5.9-6.4GHz license holders only, you would need to show your license to Distributor to be able to place your order. This product is NOT for unlicensed ISM bands!
-
SXT HG5
SXTG HG is a High Gain, High Power wireless device designed and manufactured by MikroTik. The wireless output power for this device is up to 30dBm (1000 mW!).
It is equipped with 5GHz 17dBi 24 degree antenna, Gigabit Ethernet port and RouterOS L4 license (can be used as AP, Backbone or CPE).
It is powered by our new generation AR9344 CPU, which makes it even more powerful, to ensure you get the maximum throughtput.
Unit comes complete with SXT, PoE injector, power supply and mounting kit.
– RBSXTG-5HPnD-HGr2-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
– RBSXTG-5HPnD-HGr2 (International) supports 5150MHz-5875MHz range.
-
BaseBox 2
The BaseBox2 is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.
The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.
Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.
admin –
good