- Description
- Reviews (1)
Description
Product specifications
| Details | |
|---|---|
| Product code | 18POW |
| Input Voltage | 110/220V 0.7A |
| Operating Temperature | -30℃ to +50℃ |
| Output Voltage | 24V 0.8A |
| Suggested price | |
1 review for 18POW
Add a review
Related Products
-
48 to 24V Gigabit PoE Converter
This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices.
Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output – up to 24W (up to 1A at 24V).
You can power it with virtually any 42-57V PoE solutions available on market today (Passive, Telecom, 802.3af and 802.3at PoE plus supported)
The device is a rugged metallic design, with high quality components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall.
Ethernet shield pins are inside the Ethernet connectors, so that shielded ethernet can be used, to ground either at the converter itself, or at the devices at both ends. Supports 10/100/1000Mbps Ethernet.
Note: In case if 803.3af compilant PSE is used, total output power should not exceed 12.95w (limited by the 803.3af standard).
-
MMCX-RPSMA pigtail
MMCX to RPSMA pigtail,for adding second wireless interface to BaseBox2 or BaseBox5
Length of cable 260mm
-
quickMOUNT pro
The quickMOUNT pro is an advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment.
The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale.
You can use the quickMOUNT pro with any pole mountable device or MikroTik’s small mounting clip with weight less than 1.5 kg.
The adapter is very durable due to it’s special plastic composite material – anvilNITE (TM).
-
Flex-guide
A super low loss 50cm long RPSMA cable for superior connection quality, suited for indoor and outdoor use, this cable provides superior matching and loss values.
The name of this cable comes from combining the words “flexible” and “waveguide”, to denote the high end features of this product.
The inner conductor is silver plated copper, and both connectors are soldered, not crimped, for the best possible signal quality. Ideally suited for our BaseBox and other products with RPSMA connectors, and works with most antennas.
-
12POW150
CCR1072-1G-8S+ is equipped with two redundant Hot Swap 12v 150W AC/DC power supplies – if one of them goes out of order, second one will take over.
Hot Swap 12v 150W AC/DC power supplies for CCR1072-1G-8S+ are now available for purchase separately. You can replace them on the go to ensure zero downtime, no need to even restart the router
admin –
good